- Axial runout
- 2.5 µm
- Basic dynamic load rating, axial
- 52000.0 N
- Basic static load rating, axial
- 127000.0 N
- Bearing frictional torque
- 0.5 Nm
- Bore diameter lower tolerance
- -0.005 mm
- Bore diameter upper tolerance
- 0.0 mm
- Connection thread for lubrication
- M6
- Contact angle
- 60.0 °
- Distance of extraction slot
- 47.0 mm
- Fatigue load limit, axial
- 7700.0 N
- Fixing holes diameter
- 6.8 mm
- Limiting speed for grease lubrication
- 6700.0 1/min
- Marketing category
- XL
- Mass moment of inertia
- 1.46 kg*cm²
- Maximum diameter of housing
- 53.0 mm
- Minimum chamfer dimension
- 0.3 mm
- Minimum diameter shaft
- 40.0 mm
- Number of bearings
- 2AP
- Number of holes in adjacent construction
- 11.0
- Operating temperature max.
- 120.0 °C
- Operating temperature min.
- -30.0 °C
- Outside diameter lower tolerance
- -0.01 mm
- Outside diameter upper tolerance
- 0.0 mm
- PFAS
- nein
- Pitch circle diameter fixing holes
- 63.0 mm
- Pitch quantity of fixing holes
- 11.0
- Pitch separation angle of fixing holes
- 30.0 °
- Pitch separation angle of holes in adjacent construction
- 30.0 °
- Position tolerance of bore in the housing
- 0.1 mm
- REACH
- REACH conform
- Recommended INA precision locknut for axial locking
- AM30
- Recommended INA precision locknut for radial locking
- ZMA30/52
- Required locknut force axial
- 9947.0 N
- Rib diameter inner ring
- 45.5 mm
- Rigidity axial
- 1500.0 N/µm
- RoHS
- RoHS compliant
- Sealing
- 2Z
- Size of fixing screws
- M6x70
- Thermally safe operating speed
- 4300.0 1/min
- Tightening torque for the recommended INA precision locknut
- 32.0 Nm
- Tilting rigidity
- 620.0 Nm/mrad
- Width lower tolerance
- -0.5 mm
- Width of extraction slot
- 3.0 mm
- Width upper tolerance
- 0.0 mm
